Front and rear mounted hydraulic folding 6 row x 90cm (36”) haulm topper

The Trinity 6000 haulm topper consists of one front linkage mounted reversible topper with two additional topper units attached to a rear mounted hydraulically folding tool bar. This system is designed to work on bed widths varying from 1.7 metres up to 2 metres. To overcome the need for an expensive and generally high maintenance cross conveyor, shear plates have been utilized to give a similar effect of a straw chopper. This in turn finely chops the haulm to the point where the following potato harvester can sieve the debris without the use of haulm rollers. Fitted with 3 identical and reversable 2.1m rotors allowing a greater number of longer flails to be fitted in the outer valley bottoms which drastically improves suction.

  • Reduced running costs– competitively priced wearing parts and quick change flails for reduced down time
  • Front and rear mounted units give perfect balance in the field and on the road
  • Heavy duty stub axles, wheel bearings and easy rolling oversize wheels
  • Greatest range of cutting height due to superior depth wheels
  • Standard rotors on all three topper units which can be reversed in case of a damaged drive keyway
  • Rotors feature heavy duty 55mm taper lock bearings
  • Greater variation in flail length to allow better flailing in row bottoms and also flat blades across the row top for maximum suction
  • Category 2 linkage on front unit and Category 3 linkage on rear unit
  • Replaceable steel inner liner for hood protection unique to the Trinity range of toppers
  • Shear plates to assist fine chopping of haulm with choice of single row or full bed width deflectors
  • Inspection hatches on front unit
  • Optional Ridgepress system featuring individually sprung loaded 24” wheels
  • Adjustable row and bed widths from 30” to 40”
  • V belts increased to 5 belts per topper unit upping the power transfer to a class leading 250hp